Toyota
Ford Kuga
 Service Manual
Engine Emission Control - 2.5L Duratec (147kW/200PS) - VI5 » Engine Emission Control
Inspection and Verification

1. Verify the customer concern.

2. Visually inspect for obvious signs of mechanical damage.

Visual Inspection Chart

Mechanical Electrical
  • Hose(s)/hose joints
  • Gasket(s)
  • Positive crankcase ventilation (PCV) valve
  • PCV crankcase vent oil separator
  • Turbocharger
  • Electrical connector(s)
  • Wiring harness
  • Fuse(s)
  • Relay
  • Powertain control module (PCM)

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.

4. If the cause is not visually evident, verify the symptom and refer to the Symptom Chart.

    More about «Engine Emission Control»:

    Inspection and Verification

    Symptom Chart

    Ford Kuga Service Manual / Engine Emission Control - 2.5L Duratec (147kW/200PS) - VI5 / Engine Emission Control / Inspection and Verification

    Ford Kuga Service Manual

    Main Categories


    © 2017-2020 Copyright www.fokuman.com
    0.0133