Toyota
Ford Kuga
 Service Manual
Warning Devices
Inspection and Verification

Refer to Wiring Diagrams Section 501-20B, for schematic and connector information.

General Equipment

Ford diagnostic equipment

1. Verify the customer concern.

2. Visually inspect for obvious signs of mechanical or electrical damage.

Visual Inspection Chart

Mechanical Electrical
Safety belt buckle
  • Wiring harness
  • Electrical connector(s)
  • Safety belt buckle switch
  • Restraints control module

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.

4. If the cause is not visually evident, verify the symptom and refer to the Ford diagnostic equipment to diagnose the system.

    More about «Warning Devices»:

    Inspection and Verification

    Safety Belt Minder Deactivating/Activating

    Oil Change Indicator Reset

    Ford Kuga Service Manual / Warning Devices / Inspection and Verification

    Ford Kuga Service Manual

    Main Categories


    © 2017-2019 Copyright www.fokuman.com
    0.0125