Toyota
Ford Kuga
 Owners Manual
Cruise Control » Using Adaptive Cruise Control
Using the System

Use the steering wheel controls to operate the system.

Using the System

A Set speed increase

B Set speed decrease

C On and off

D Gap increase

E Gap decrease

F Cancel and resume

Switching the System On

Press switch C. The system is set to standby mode.

Setting a Speed

Note: The system must be in standby mode.

Press switch A or B to select your desired cruise speed. The speed is displayed in the information display and stored as the set speed.

Changing the Set Speed

Note: Vehicle speed may be increased and decreased at intervals of 5 mph or 5 km/h depending on your unit of measure setting.

Note: If the system does not react to these changes the reason may be that the gap interval to the vehicle in front of you prevents an increase in speed.

Press switch A to increase or switch B to decrease the set speed until the desired set speed is shown in the information display. Your vehicle speed will gradually change to the selected speed.

    More about «Using Adaptive Cruise Control»:

    Detection Beam Issues

    Automatic Braking

    Using the System

    Setting the Vehicle Gap

    Automatic Switch Off

    Forward Alert Function

    Ford Kuga Owners Manual / Cruise Control / Using Adaptive Cruise Control / Using the System

    Ford Kuga Owners Manual

    Main Categories


    © 2017-2024 Copyright www.fokuman.com
    0.0058