Ford Kuga

 Service Manual

Glass, Frames and Mechanisms
Door Window Motor Initialization

WARNING: The anti-trap function will not operate during the initialization procedure.

CAUTION: Make sure that the door window opening is free of all foreign material.

NOTE: If the power to a window regulator motor has been disconnected, it is necessary to initialize that window regulator motor.

NOTE: Wait for a minimum of 1 minute before connecting the battery, fuse or electrical connector.

All vehicles

1. Switch on the ignition.

2. Pull and hold the window control switch to the second detent until the door window is fully closed.

3. Briefly release the window control switch and pull again to the second detent for three seconds.

4. Press and hold the window control switch to the second detent until the door window is fully opened.

5. Briefly release the window control switch and press again to the second detent for three seconds.

6. Pull and hold the window control switch to the second detent until the door window is fully closed.

7. Repeat the power door window initialization for each power door window.

Convertible

8. Press and hold the convertible top switch in the close position until the convertible top is fully closed. Hold the switch in the close position for further three seconds.

All vehicles

9. Switch off the ignition.

Glass, Frames and Mechanisms (Component Location)

Glass, Frames and Mechanisms (Overview)

Glass, Frames and Mechanisms (System Operation and Component Description)

Glass, Frames and Mechanisms - Vehicles With: Front and Rear Power Windows

Door Window Motor Initialization

Front Door Window Glass

Front Door Window Regulator

Front Door Window Regulator Motor

Glass Roof Panel

Liftgate Window Glass

Rear Door Window Glass

Rear Door Window Regulator

Rear Door Window Regulator Motor

Rear Quarter Window Glass

Windshield Glass