Toyota
Ford Kuga
 Service Manual
Engine Cooling
Engine Cooling - 2.5L Duratec (147kW/200PS) - VI5 (Overview)

Auxiliary coolant pump

An electrically operated auxiliary coolant pump is installed on vehicles with a trailer coupling and/or additional heating. The auxiliary coolant pump ensures that the coolant is circulated when the coolant pump (which is driven by the engine) is not running.

The additional heating uses the auxiliary coolant pump to circulate hot coolant through the heat exchanger and the engine.

On vehicles with a trailer coupling the auxiliary coolant pump is switched on for 6 minutes by the PCM (powertrain control module) if the coolant temperature exceeds 106C when the engine is switched off. This prevents the coolant circuit from overheating. This could happen particularly if the engine is switched off after towing a heavy trailer up a steep hill before there has been sufficient time for cooling.

    More about «Engine Cooling»:

    Engine Cooling - 2.5L Duratec (147kW/200PS) - VI5 (Component Location)

    Engine Cooling - 2.5L Duratec (147kW/200PS) - VI5 (Overview)

    Engine Cooling

    Cooling System Draining and Vacuum Filling

    Radiator Lower Mounting Repair

    Coolant Pump - 2.5L Duratec (147kW/200PS) - VI5

    Cooling Fan Motor and Shroud - 2.5L Duratec (147kW/200PS) - VI5

    Radiator - 2.5L Duratec (147kW/200PS) - VI5

    Thermostat - 2.5L Duratec (147kW/200PS) - VI5

    Thermostat Housing - 2.5L Duratec (147kW/200PS) - VI5

    Ford Kuga Service Manual / Engine Cooling / Engine Cooling - 2.5L Duratec (147kW/200PS) - VI5 (Overview)

    Ford Kuga Service Manual

    Main Categories


    © 2017-2024 Copyright www.fokuman.com
    0.0065