Ford Kuga
Service Manual
Engine Emission Control - 2.5L Duratec (147kW/200PS) - VI5 » Engine Emission Control
Inspection and Verification

1. Verify the customer concern.

2. Visually inspect for obvious signs of mechanical damage.

Visual Inspection Chart

Mechanical	Electrical
Hose(s)/hose joints Gasket(s) Positive crankcase ventilation (PCV) valve PCV crankcase vent oil separator Turbocharger	Electrical connector(s) Wiring harness Fuse(s) Relay Powertain control module (PCM)

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.

4. If the cause is not visually evident, verify the symptom and refer to the Symptom Chart.

More about «Engine Emission Control»:

Inspection and Verification