Ford Kuga

 Service Manual

Engine Cooling
Radiator - 2.5L Duratec (147kW/200PS) - VI5

General Equipment

Cable Ties

Hose Clamp Remover/Installer

Removal

NOTE: Removal steps in this procedure may contain installation details.

3. Refer to: Charge Air Cooler (303-12 Intake Air Distribution and Filtering - 2.5L Duratec (147kW/200PS) - VI5, Removal and Installation).

4. Refer to: Cooling System Draining and Vacuum Filling (303-03 Engine Cooling, General Procedures).

5. Torque: 25 Nm

6. NOTE: The gasket is to be reused unless damaged.

Vehicles with automatic transmission

7. General Equipment: Cable Ties

All vehicles

8. General Equipment: Hose Clamp Remover/Installer

9. Torque: 5 Nm

10. General Equipment: Cable Ties

Installation

1. To install, reverse the removal procedure.

Engine Cooling - 2.5L Duratec (147kW/200PS) - VI5 (Component Location)

Engine Cooling - 2.5L Duratec (147kW/200PS) - VI5 (Overview)

Engine Cooling

Cooling System Draining and Vacuum Filling

Radiator Lower Mounting Repair

Coolant Pump - 2.5L Duratec (147kW/200PS) - VI5

Cooling Fan Motor and Shroud - 2.5L Duratec (147kW/200PS) - VI5

Radiator - 2.5L Duratec (147kW/200PS) - VI5

Thermostat - 2.5L Duratec (147kW/200PS) - VI5

Thermostat Housing - 2.5L Duratec (147kW/200PS) - VI5