Toyota
Ford Kuga
 Service Manual
Speed Control
Speed Control

Inspection and Verification

1. Verify the customer concern by operating the system.

2. Visually inspect for obvious signs of mechanical or electrical damage.

Visual Inspection Chart

Mechanical Electrical
  • Brake pedal
  • Clutch pedal
  • Fuse(s)
  • Connections
  • Wiring harness
  • Clockspring
  • Loose or corroded electrical connector(s)
  • Speed control switch
  • Brake pedal position (BPP) deactivation switch
  • Clutch pedal position (CPP) deactivation Switch
  • Powertrain control module (PCM)
  • Central junction box (CJB)

3. NOTE: Not all passenger junction box (PJB) variants support the speed control system.

NOTE: If the PJB is configured for speed control disable, speed control operation is not transmitted, no Diagnostic Trouble Codes (DTCs) are generated.

If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.

4. If the cause is not visually evident, verify the symptom and refer to the diagnostic tab within the Ford approved diagnostic tool.

    More about «Speed Control»:

    Speed Control (Overview).

    Speed Control (System Operation and Component Description).

    Speed Control

    Ford Kuga Service Manual / Speed Control / Speed Control

    Ford Kuga Service Manual

    Main Categories


    © 2017-2024 Copyright www.fokuman.com
    0.0181