Ford Kuga

 Service Manual

Power Steering
Steering Gear to Power Steering Fluid Reservoir Return Line-2.5L Duratec (147kW/200PS) - VI5(13 439 0)

General Equipment

Hose Clamp Remover/Installer

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Steering System Health and Safety Precautions (100-00 General Information, Description and Operation).

2. Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).

WARNING: Be prepared to collect escaping fluid.

1. General Equipment: Hose Clamp Remover/Installer

2. Torque: 30 Nm

7. 1. Torque: 23 Nm

2. Torque: 7 Nm

8. Torque: 4 Nm

WARNING: Be prepared to collect escaping fluid.

CAUTION: Make sure that all openings are sealed.

Torque: 18 Nm

Installation

1. To install, reverse the removal procedure.

4. NOTE: Make sure the fluid in the reservoir does not fall below the MIN mark, as air could enter the system.

Slowly turn the steering wheel from lock to lock five times.

Power Steering (Overview)

Power Steering (System Operation and Component Description)

Power Steering Pressure Line and Return Line Assembly - 2.5L Duratec (147kW/200PS) - VI5(13 434 0)

Power Steering Pump - 2.5L Duratec (147kW/200PS) - VI5(13 434 0)

Power Steering Pump to Steering Gear Pressure Line - 2.5L Duratec (147kW/200PS) - VI5(13 440 0; 13 443 0)

Steering Gear(13 116 0)

Steering Gear to Power Steering Fluid Reservoir Return Line-2.5L Duratec (147kW/200PS) - VI5(13 439 0)