Ford Kuga

 Service Manual

Wipers and Washers
Wiper Blade Angle Adjustment

Special Tool(s)

	501-027 Aligner, Wiper Arm
	501-027-01 Adapter for 501-027

CAUTION: Make sure that the motor is in the park position.

2. NOTE: The angle of the wiper on the scale must point from the zero center line to the center of the windshield/rear window. Ignore the sign (+/-) on the alignment tool.

NOTE: Make sure that the 3 marked points of the special tool are in contact with the glass.

Using the special tool, read off the angle between the wiper arm and the glass.

Special Tool(s): 501-027, 501-027-01

CAUTION: Make sure that the special tool is lifted off the glass when adjusting the angle.

Adjust the wiper arm to a setting angle of 4+-2.

Wipers and Washers (Component Location)

Wipers and Washers (Overview)

Wipers and Washers (System Operation and Component Description)

Wipers and Washers

Wiper Blade Angle Adjustment

Windshield Wiper Motor

Rear Window Wiper Motor

Windshield Washer Pump

Windshield Washer Reservoir

Headlamp Washer Pump

Headlamp Washer Jet

Rain Sensor