Toyota
Ford Kuga
 Service Manual
Anti-Theft - Active
Anti-Theft - Active

Refer to Wiring Diagrams Section 419-01A, for schematic and connector information.

General Equipment

The Ford approved diagnostic tool

Inspection and Verification

1. Verify the customer concern, perform a full alarm function test

2. Visually inspect for obvious signs of mechanical or electrical damage.

Visual Inspection Chart

Mechanical Electrical
  • Misaligned door(s), hood or tailgate
  • Door ajar switche(s)
  • Latch(es)
  • Cable(s)
  • Lock cylinder(s)
  • Set/reset switch(s)
  • Linkage(s)
  • Remote key
  • Passive key
  • Interior scanning system
  • Interior scanning system disable button (if equipped)
  • Fuse(s)
  • Wiring harness
  • Electrical connector(s)
  • Relay(s)
  • Generic electronic module (GEM)
  • Anti-theft alarm horn
  • Anti-theft alarm horn with integral battery (if equipped)

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.

4. If the cause is not visually evident, verify the symptom and refer to the Ford approved diagnostic tool to diagnose the system.

    More about «Anti-Theft - Active»:

    Anti-Theft - Active (Component Location)

    Anti-Theft - Active (Overview)

    Anti-Theft - Active (System Operation and Component Description)

    Anti-Theft - Active

    Anti-Theft Alarm Horn

    Anti-Theft Alarm Horn with Integral Battery

    Ford Kuga Service Manual / Anti-Theft - Active / Anti-Theft - Active

    Ford Kuga Service Manual

    Main Categories


    © 2017-2019 Copyright www.fokuman.com
    0.0297