Toyota
Ford Kuga
 Service Manual
Brake System - General Information
Component Bleeding

General Equipment

Fluid Container

Bleeding

NOTE: Make sure that the vehicle is standing on a level surface.

1. Refer to: Brake System Health and Safety Precautions (100-00 General Information, Description and Operation).

Vehicles with stability assist 2. Bleed the brake system using the BleedMASTER function in the diagnostic tool.

Vehicles without stability assist

Component Bleeding

CAUTION: The brake fluid reservoir must remain full with new, clean brake fluid at all times during bleeding.

Refer to: Specifications (206-00 Brake System - General Information, Specifications).

Component Bleeding

Component Bleeding

6. General Equipment: Fluid Container

Component Bleeding

7. Loosen: 180

Component Bleeding

8. Operate the brake pedal fully (pumping brake fluid and air into the bleed jar) and allow the brake pedal to return to the rest position.

9. Continue operating the brake pedal until air-free fluid is being pumped into the bleed jar.

10. Refer to: Specifications (206-00 Brake System - General Information, Specifications).

Component Bleeding

11. With the brake pedal fully depressed tighten the bleed nipple.

Torque: 9 Nm

Component Bleeding

Component Bleeding

Component Bleeding

    More about «Brake System - General Information»:

    Brake System

    Brake Disc Runout Check (12 221 0)

    Component Bleeding

    Brake System Bleeding

    Brake System Draining and Filling (12 154 0; 12 154 4)

    Brake System Pressure Bleeding

    Ford Kuga Service Manual / Brake System - General Information / Component Bleeding

    Ford Kuga Service Manual

    Main Categories


    © 2017-2024 Copyright www.fokuman.com
    0.0059