Toyota
Ford Kuga
 Service Manual
Warning Devices » Safety Belt Minder Deactivating/Activating
Deactivating/Activating

NOTE: Deactivation of the belt minder may also be carried out using IDS. Follow the instructions on the screen.

1. Unbuckle the drivers safety belt.

2. Turn the ignition switch to position II. (Do not start the engine).

3. Wait at least 15 seconds.

4. NOTE: This step must be completed within 60 seconds or the procedure must be repeated.

Buckle then unbuckle the safety belt nine times, ending with the safety belt unbuckled.

Release the red unbuckle switch completely every cycle.

5. The safety belt warning indicator flashes three times to confirm the belt minder status change.

6. Turn the ignition switch to position 0. The deactivation/activation procedure is now complete.

    More about «Safety Belt Minder Deactivating/Activating»:

    Preparation

    Deactivating/Activating

    Ford Kuga Service Manual / Warning Devices / Safety Belt Minder Deactivating/Activating / Deactivating/Activating

    Ford Kuga Service Manual

    Main Categories


    © 2017-2019 Copyright www.fokuman.com
    0.0365