Toyota
Ford Kuga
 Service Manual
Body Repairs - General Information » Wind Noise
Heater housing/ventilation

Loose butyl sealing strips, damaged sealing surfaces or a trapped carpet can cause leaks around the heater housing / ventilation Arrow.

Badly positioned or badly fitted hoses can also be responsible for water entry. Water drains must not be blocked

Heater housing/ventilation

NOTE: A large quantity of water flows through the water tank. If there are leaks in this area, it is essential to ensure that the water drainage mechanisms function correctly. Drainage openings may not be blocked or stuck. Leaves and other dirt must be removed before troubleshooting.

Corrective action

Before the actual repair, make sure that the water drains are not blocked or stuck.

Remove the heater housing / ventilation and fit a new Butyl sealing strip. Damaged sealing surfaces must first be adjusted. A trapped carpet must be removed.

    More about «Wind Noise»:

    General information

    Rubber grommets I plugs

    Heater housing/ventilation

    Seal welds

    Attached parts

    Ford Kuga Service Manual / Body Repairs - General Information / Wind Noise / Heater housing/ventilation

    Ford Kuga Service Manual

    Main Categories


    © 2017-2020 Copyright www.fokuman.com
    0.0399