Toyota
Ford Kuga
 Service Manual
Instrument Cluster » Instrument Cluster
Inspection and Verification

Refer to Wiring Diagrams Section 413-01, for schematic and connector information.

General Equipment

The Ford approved diagnostic tool

1. Verify the customer concern.

2. Visually inspect for obvious signs of mechanical or electrical damage.

Visual Inspection Chart

Mechanical Electrical
  • Engine oil filter
  • Engine oil level
  • Engine coolant level
  • Oil pressure switch
  • Engine coolant level
  • Coolant thermostat
  • Engine coolant temperature (ECT) sensor
  • Fuel gauge
  • Collapsed or damaged fuel tank
  • Recirculation hose
  • Fuel tank filler pipe/hose
  • Indicated fuel level
  • Fuel lines
  • Fuel tank filler cap
  • Fuel filter (external to the fuel tank)
  • Fuel tank
  • Door adjustment
  • Fuse(s)
  • Wiring harness
  • Electrical connector(s)
  • Instrument cluster
  • Light emitting diode(s) (LED)(s)

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.

4. NOTE: If none of the following warning indicators are operating correctly this may indicate a concern with the central junction box (CJB). If only one or two of the following warning indicators are not operating correctly this may indicate an instrument cluster concern.

Verify the following warning indicators are working correctly:

  • Charging.
  • Turn signals.
  • Headlamps.

5. If the cause is not visually evident, verify the symptom and refer to the diagnostic tab within the Ford approved diagnostic tool.

    More about «Instrument Cluster»:

    Inspection and Verification

    Configuration of the Instrument Cluster

    Ford Kuga Service Manual / Instrument Cluster / Instrument Cluster / Inspection and Verification

    Ford Kuga Service Manual

    Main Categories


    © 2017-2019 Copyright www.fokuman.com
    0.0165