Toyota
Ford Kuga
 Service Manual
Rear Drive Axle/Differential » Rear Drive Axle and Differential (System Operation and Component Description)
Pressure build-up

Pressure build-up

Item Description
A Barometric Pressure
B Base pressure
C Increased base pressure (preload)
Drive Operating pressure

The pump plungers generate the operating pressure that is controlled by the control valve as a function of the difference in speed between the input and output shafts. The control valve works progressively from fully open to fully closed. The fluid pressure can be approx. 67 bar when the control valve is fully open. The maximum pressure is mechanically controlled by means of the pressure relief valve.

    More about «Rear Drive Axle and Differential (System Operation and Component Description)»:

    General Information

    Driving situations

    Haldex clutch

    Design of the 3rd generation Haldex clutch

    Design of the multi-plate clutch

    All-wheel drive control unit

    Electric feed pump

    Pressure control - 3rd generation Haldex clutch

    Base pressure

    Increased base pressure (preload)

    Pressure build-up

    Design of the 4th generation Haldex clutch

    Pressure control - 4th generation Haldex clutch

    Ford Kuga Service Manual / Rear Drive Axle/Differential / Rear Drive Axle and Differential (System Operation and Component Description) / Pressure build-up

    Ford Kuga Service Manual

    Main Categories


    © 2017-2020 Copyright www.fokuman.com
    0.0136