Toyota
Ford Kuga
 Service Manual
Anti-Lock Control - Stability Assist » Anti-Lock Control - Stability Assist (Overview)
Rear wheel sensor

Rear wheel sensor

4X4: The ABS sensor rings are pressed onto the rear drive shafts. The wheel sensors are joined to the main wiring harness using a separate connecting cable.

4X2: The ABS sensor rings are built into the hubs of the rear wheel bearings. When installing a replacement bearing, ensure that the new part is aligned correctly. The wheel sensors are joined to the main wiring harness using a separate connecting cable.

    More about «Anti-Lock Control - Stability Assist (Overview)»:

    Overview

    ABS/ESP module or hydraulic control unit (HCU)

    Combined yaw rate sensor and lateral acceleration sensor / longitudinal acceleration sensor

    Rear wheel sensor

    Opto-electronic steering wheel rotation sensor

    Ford Kuga Service Manual / Anti-Lock Control - Stability Assist / Anti-Lock Control - Stability Assist (Overview) / Rear wheel sensor

    Ford Kuga Service Manual

    Main Categories


    © 2017-2024 Copyright www.fokuman.com
    0.0066