Toyota
Ford Kuga
 Service Manual
Starting System- 2.5L Duratec (147kW/200PS) - VI5
Starting System

Refer to Wiring Diagrams Section 303-06, for schematic and connector information.

General Equipment

Ford diagnostic equipment

Inspection and Verification

1. Verify the customer concern.

2. Visually inspect for obvious signs of electrical damage.

Visual Inspection Chart

Electrical

  • Fuse(s)
  • Wiring harness
  • Electrical connector(s)
  • Relay
  • Switch(es)
  • Battery junction box (BJB)
  • Engine junction box (EJB)
  • Central junction box (CJB)
  • Keyless vehicle module (KVM) (if equipped)
  • Battery
  • Starter motor
  • Powertrain Control Module (PCM)

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.

4. If the cause is not visually evident, verify the symptom and refer to the diagnostic tab within the Ford diagnostic equipment.

    More about «Starting System- 2.5L Duratec (147kW/200PS) - VI5»:

    Starting System (System Operation and Component Description)

    Starting System

    Starter Motor

    Start Inhibit Switch

    Ford Kuga Service Manual / Starting System- 2.5L Duratec (147kW/200PS) - VI5 / Starting System

    Ford Kuga Service Manual

    Main Categories


    © 2017-2020 Copyright www.fokuman.com
    0.015