Ford Kuga

 Service Manual

Fuel Charging and Controls - Turbocharger- 2.5L Duratec (147kW/200PS) - VI5
Turbocharger

General Equipment

Cable Ties

Hose Clamp Remover/Installer

Materials

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).

2. Refer to: Cooling System Draining and Vacuum Filling (303-03 Engine Cooling, General Procedures).

3. Refer to: Cowl Panel Grille (501-02 Front End Body Panels, Removal and Installation).

CAUTION: Make sure that the inside of the pipe ends are clean and free of oil residue.

1. Torque: 10 Nm

2. Torque: 4 Nm

3. Torque: 10 Nm

7. 1. Torque: 26 Nm

2. Torque: 26 Nm

3. Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation).

Torque: 38 Nm

8. Torque: 24 Nm

CAUTION: Make sure that the inside of the pipe ends are clean and free of oil residue.

10.Torque: 17 Nm

CAUTION: Make sure that the inside of the pipe ends are clean and free of oil residue.

Torque: 4 Nm

13. General Equipment: Cable Ties

14.Torque: 28 Nm

16.Torque: 24 Nm

CAUTION: Make sure that the exhaust flexible pipe is not forcibly bent.

Material: Grease KS-PS (SA-M1C9107-A / YS5J-M1C9107-AA) grease

Torque: 50 Nm

18. General Equipment: Hose Clamp Remover/Installer

Torque: 38 Nm

19.Torque: 12 Nm

20.Torque: 24 Nm

Installation

1. To install, reverse the removal procedure.

2. Refer to: Door Window Motor Initialization (501-11 Glass, Frames and Mechanisms, General Procedures).

Turbocharger (Component Location)

Turbocharger (Overview)

Turbocharger (System Operation and Component Description)

Turbocharger

Turbocharger