Toyota
Ford Kuga
 Service Manual
Automatic Transmission/Transaxle » Transmission Description (Overview)
Programming the 'N' position of the TR sensor

This function must be executed if

  • the TCM with integrated TR sensor is renewed,
  • a new automatic transaxle is installed with the previous TCM.
  • the selector lever cable or the selector mechanism assembly is renewed
  • TR have been set due to a fault in the selector lever assembly or in the DTC (diagnostic trouble code) sensor.

The TCM learns and stores the voltage value in the 'N' position when this function is executed.

    More about «Transmission Description (Overview)»:

    Components of the AW55 automatic transaxle

    Transaxle cooling

    External shift mechanism

    Components of the electronic control

    Knowing and Understanding Customer Concerns

    Testing Possible Causes of Transmission Control Faults

    Visual inspection

    Towing the vehicle

    Push-starting the Vehicle

    Selector Lever Emergency Release

    Transmission Fluid Level Check

    Changing the Transmission Fluid

    Diagnosis with IDS

    Programming the 'N' position of the TR sensor

    Resetting the values learned by the TCM

    Ford Kuga Service Manual / Automatic Transmission/Transaxle / Transmission Description (Overview) / Programming the 'N' position of the TR sensor

    Ford Kuga Service Manual

    Main Categories


    © 2017-2020 Copyright www.fokuman.com
    0.017