Toyota
Ford Kuga
 Service Manual
Automatic Transmission/Transaxle » Transmission Description (Overview)
Push-starting the Vehicle

No torque is transmitted when towing or pushing the vehicle. For this reason, vehicles with an automatic transaxle cannot and must not be tow-started or push-started.

Jump-starting the Vehicle

CAUTION: When jump-starting the vehicle using a jumper lead there may be voltage peaks. These may destroy the transaxle electronics.

NOTE: When jump-starting the vehicle, the external battery must remain connected for several minutes.

The voltage peaks dissipate after a few minutes.

Only then may the external battery be disconnected without the risk of damage.

    More about «Transmission Description (Overview)»:

    Components of the AW55 automatic transaxle

    Transaxle cooling

    External shift mechanism

    Components of the electronic control

    Knowing and Understanding Customer Concerns

    Testing Possible Causes of Transmission Control Faults

    Visual inspection

    Towing the vehicle

    Push-starting the Vehicle

    Selector Lever Emergency Release

    Transmission Fluid Level Check

    Changing the Transmission Fluid

    Diagnosis with IDS

    Programming the 'N' position of the TR sensor

    Resetting the values learned by the TCM

    Ford Kuga Service Manual / Automatic Transmission/Transaxle / Transmission Description (Overview) / Push-starting the Vehicle

    Ford Kuga Service Manual

    Main Categories


    © 2017-2020 Copyright www.fokuman.com
    0.0124