Toyota
Ford Kuga
 Service Manual
Automatic Transmission/Transaxle
Transmission Range (TR) Sensor

Special Tool(s)

501-028A Pliers, Door Trim Removal

Removal

Transmission Range (TR) Sensor

Transmission Range (TR) Sensor

Transmission Range (TR) Sensor

Transmission Range (TR) Sensor

Transmission Range (TR) Sensor

Transmission Range (TR) Sensor

CAUTION: Use an open-ended wrench to prevent the component from turning.

3. Special Tool(s): 501-028A

Transmission Range (TR) Sensor

Transmission Range (TR) Sensor

Installation

1. NOTE: Make sure that a new component is installed.

1.

2. NOTE: Only tighten the bolts finger tight at this stage.

Transmission Range (TR) Sensor

2. 2. Torque: 16 Nm

Transmission Range (TR) Sensor

CAUTION: Use an open-ended wrench to prevent the component from turning.

3. Torque: 25 Nm

Transmission Range (TR) Sensor

Transmission Range (TR) Sensor

5. Refer to: Selector Lever Cable Adjustment - Vehicles With: 5-Speed Automatic Transaxle - AW55 AWD (307-05 Automatic Transmission/Transaxle External Controls - Vehicles With: 5-Speed Automatic Transaxle - AW55 AWD/6-Speed Automatic Transaxle - 6DCT450, General Procedures).

Transmission Range (TR) Sensor

Transmission Range (TR) Sensor

Transmission Range (TR) Sensor

Transmission Range (TR) Sensor

    More about «Automatic Transmission/Transaxle»:

    Transmission Description (Overview)

    Transmission Description (System Operation and Component Description)

    Transmission Fluid Level Check

    Transmission Fluid Drain and Refill

    Halfshaft Seal LH

    Halfshaft Seal RH

    Main Control Valve Body

    Output Shaft Speed (OSS) Sensor

    Torque Converter Seal

    Transmission Fluid Pan

    Transmission Range (TR) Sensor

    Turbine Shaft Speed (TSS) Sensor

    Transmission

    Ford Kuga Service Manual / Automatic Transmission/Transaxle / Transmission Range (TR) Sensor

    Ford Kuga Service Manual

    Main Categories


    © 2017-2020 Copyright www.fokuman.com
    0.0131