Toyota
Ford Kuga
 Service Manual
Anti-Lock Control
Anti-Lock Control

Refer to Wiring Diagrams Section 206-09A, for  schematic and connector information

General Equipment

The Ford approved diagnostic tool

Inspection and Verification

1. Verify the customer concern.

2. Visually inspect for obvious signs of mechanical or electrical damage.

Visual Inspection Chart

Mechanical Electrical
  • Wheel speed sensor(s)
  • Wheel speed sensor ring(s)
  • Fuse(s)
  • Electrical connector(s)
  • Wiring harness(s).
  • Anti-lock brake system (ABS) module

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.

4. If the cause is not visually evident, verify the symptom and refer to the diagnostic tab within the Ford approved diagnostic tool.

    More about «Anti-Lock Control»:

    Anti-Lock Control (Component Location)

    Anti-Lock Control

    Ford Kuga Service Manual / Anti-Lock Control / Anti-Lock Control

    Ford Kuga Service Manual

    Main Categories


    © 2017-2024 Copyright www.fokuman.com
    0.007