Toyota
Ford Kuga
 Service Manual
Exterior Lighting » Turn Signal and Hazard Lamps
Inspection and Checking

NOTE: The generic electronic module (GEM) forms part of the central junction box (CJB).

NOTE: If the generic electronic module (GEM) is changed, the new one must be reconfigured. For this purpose, the vehicle-specific data is read out of the module to be replaced using the Ford approved diagnostic tool and is transferred to the new module.

NOTE: Before reading out the vehicle-specific data, remake all the electrical connections which were separated in the vehicle, so that communication between the module and the Ford approved diagnostic tool is ensured.

1. Verify the customer concern.

2. Visually inspect for obvious signs of electrical damage.

Visual Inspection

Electrical

  • Fuse(s)
  • Lamp(s)
  • Connector(s).
  • Switches
  • Wiring harness

3. Resolve any obvious causes or concerns found during the visual inspection before carrying out any further tests.

4. If the cause is not visually evident, verify the symptom and refer to the diagnostic tab within the Ford approved diagnostic tool.

    More about «Turn Signal and Hazard Lamps»:

    Description of operation

    Inspection and Checking

    Ford Kuga Service Manual / Exterior Lighting / Turn Signal and Hazard Lamps / Inspection and Checking

    Ford Kuga Service Manual

    Main Categories


    © 2017-2024 Copyright www.fokuman.com
    0.0076