![]() |
211-189 Adapter, Power Steering Bleeding |
![]() |
416-D001 Hand Vacuum Pump/Pressure Pump |
Materials
| Name | Specification |
| Power Steering Fluid IW | WSA-M2C195-A / 9U7JM2C195- AA |
Bleeding
9. Refer to: Steering System Health and Safety Precautions (100-00 General Information, Description and Operation).

11. Material: Power Steering Fluid IW (WSA-M2C195-A / 9U7J-M2C195-AA) hydraulic fluid

12.NOTE: Make sure the fluid in the reservoir does not fall below the MIN mark, as air could enter the system.

13. Material: Power Steering Fluid IW (WSA-M2C195-A / 9U7J-M2C195-AA) hydraulic fluid

14.When bleeding the power steering system the vacuum will decrease. Using the special tools, maintain a sufficient vacuum of 38cm-Hg. If the vacuum decreases by more than 5cm-Hg in 5 minutes, the system should be checked for leaks.
Install the Special Tool(s): 416-D001, 211-189

15.Remove the Special Tool(s): 211-189, 416-D001

16.NOTE: Make sure the fluid in the reservoir does not fall below the MIN mark, as air could enter the system.

17. Material: Power Steering Fluid IW (WSA-M2C195-A / 9U7J-M2C195-AA) hydraulic fluid

18. 1. Using the special tools, create a vacuum of 38cm-Hg. Maintain the vacuum until the air is evacuated from the system (minimum of five minutes).
2. Release the vacuum.

19.Remove the Special Tool(s): 211-189, 416-D001

20.NOTE: Make sure the fluid in the reservoir does not fall below the MIN mark, as air could enter the system.

21. Material: Power Steering Fluid IW (WSA-M2C195-A / 9U7J-M2C195-AA) hydraulic fluid

