Toyota
Ford Kuga
 Service Manual
Roof Sheet Metal Repairs
Roof Rear Frame

General Equipment

8 mm Drill Bit

MIG/MAG Welding Equipment

General Equipment

Resistance Spotwelding Equipment

Spot weld drill Bit

Removal

1. Refer to: Roof Panel (501-28 Roof Sheet Metal Repairs, Removal and Installation).

2. General Equipment: Spot weld drill Bit

Roof Rear Frame

Roof Rear Frame

Roof Rear Frame

Roof Rear Frame

6. General Equipment: Spot weld drill Bit

Roof Rear Frame

7. General Equipment: Spot weld drill Bit

Roof Rear Frame

8. General Equipment: Spot weld drill Bit

Roof Rear Frame

Installation

1. NOTE: Before resistance spot welding of body panels with a total panel thickness of 3 mm and greater, the manufacturer's welding equipment instructions and sub-section 501-25 must be followed.

Refer to: Tools and Equipment for Body Repairs (501-25 Body Repairs - General Information, Description and Operation).

2. NOTE: Sealer or adhesive must not be applied in welding zones. Areas which were bonded or sealed needs to be thoroughly sealed afterwards.

Refer to: Sealer, Underbody Protection Material and Adhesives (501-25 Body Repairs - General Information, Description and Operation).

3. General Equipment: 8 mm Drill Bit

Roof Rear Frame

4. Resistance spot weld - Panel thickness 3 mm and greater! General Equipment: Resistance Spotwelding Equipment

Roof Rear Frame

5. General Equipment: MIG/MAG Welding Equipment

Roof Rear Frame

6. Resistance spot weld - Panel thickness 3 mm and greater! General Equipment: Resistance Spotwelding Equipment

Roof Rear Frame

7. General Equipment: MIG/MAG Welding Equipment

Roof Rear Frame

8. General Equipment: MIG/MAG Welding Equipment

Roof Rear Frame

9. Refer to: Roof Panel (501-28 Roof Sheet Metal Repairs, Removal and Installation).

    More about «Roof Sheet Metal Repairs»:

    Roof Panel

    Roof Front Frame

    Roof Rear Frame

    Ford Kuga Service Manual / Roof Sheet Metal Repairs / Roof Rear Frame

    Ford Kuga Service Manual

    Main Categories


    © 2017-2024 Copyright www.fokuman.com
    0.0074