Toyota
Ford Kuga
 Owners Manual
Wheels and Tires » Changing a Road Wheel
Assembling the Wheel Brace

Type One

WARNING

The screw-in towing eye has a left-hand thread. Turn it counterclockwise to install it. Make sure that the towing eye is fully tightened.

Type One

Insert the screw-in towing eye into the wheel brace.

Type Two

Type Two

Note:When jacking your vehicle, you will need to rotate the wheel brace 180 degrees, pivot the wheel brace back to the original position before rotating again.

Using the Wheel Brace as a Jack Handle

1. Attach the wheel brace to the jack horizontally.

2. Rotate the wheel brace 180 degrees.

3. Return the wheel brace to the original position and repeat as necessary.

    More about «Changing a Road Wheel»:

    Vehicles with a Spare Wheel

    Vehicle Jack

    Jacking and Lifting Points

    Assembling the Wheel Brace

    Removing the Wheel Trim

    Removing a Road Wheel

    Installing a Road Wheel

    Stowing the Flat Tire

    Ford Kuga Owners Manual / Wheels and Tires / Changing a Road Wheel / Assembling the Wheel Brace

    Ford Kuga Owners Manual

    Main Categories


    © 2017-2024 Copyright www.fokuman.com
    0.0073