Toyota
Ford Kuga
 Service Manual
Safety Belt System
Static Test

With the vehicle stationary and on level ground take firm hold of the safety belt webbing (on the tongue side of the upper safety belt anchor) and pull out quickly. The retractor should lock within 0.25 meter (10 inches), preventing further webbing payout. Any safety belt retractor from which it is possible to extract further webbing must not be used. A new safety belt must be installed.

    More about «Safety Belt System»:

    Principles of Operation

    Inspection and Verification

    Component Test

    Vehicle Motion Sensor Test

    Test Method 1 (braking)

    Test Method 2 (turning circle)

    Static Test

    Front Safety Belt Retractor

    Rear Safety Belt Retractor

    Rear Center Safety Belt Retractor

    Safety Belt Shoulder Height Adjuster

    Front Safety Belt Buckle

    Ford Kuga Service Manual / Safety Belt System / Static Test

    Ford Kuga Service Manual

    Main Categories


    © 2017-2024 Copyright www.fokuman.com
    0.0078